Smooth On Ease Release 2831

Rated 0 out of 5

$39.00
+ GST ($42.90 AUD)

In stock

We accept

30-days Free Returns

See policies

Details

Ease Release™ 2831 is a wax-based non-silicone release agent. It has proven to be effective when used to release polyurethane foams elastomers. Ease Release™ 2831 works with aluminum, steel, and elastomeric mold construction.

Additional information

Features

Excellent Release
Non-Silicone
Contains no chlorinated or CFC solvents
Low wax build-up
Increased productivity
Excellent cleanability
Low environmental hazards
Low mold maintenance

Instructions

Safety – Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Skin contact may cause dryness.

Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.

SHAKE WELL BEFORE USING

Applying – Apply a coat of Ease Release™ 2831 with a spray or brush, and allow to dry. Rub Ease Release™ 2831 into mold surface with a clean cloth. Repeat two or three times to seal the mold surface. Start molding and reapply a light coat of Ease Release™ 2831 after each molding cycle.

Finishing – Thorough cleaning of the molded parts is recommended prior to bonding or any other post mold finishing.